Replacing Disc Brake Piston for Dexter Axle 8,000-lb Caliper
Updated 06/28/2018 | Published 06/27/2018
Products Featured in This Question
Question:
I have a piston that is stuck and I cant push it back in to replace the brake pad. Is this a fairly simple change out or rebuild to replace the piston and seals? And what seal kit do I need to go along with this piston?
asked by: CHAD D
Expert Reply:
What is simple for you may not be simple for another person, but if you are generally handy then you should not have a difficult time repairing your caliper. What you need for your Dexter Axle 8,000-lb Caliper is Replacement Disc Brake Piston # 054-093-00 along with Caliper Rebuild Kit for 6,000-lb to 8,000-lb Dexter Disc Brakes # K71-670-00 and you'd be set.
Product Page this Question was Asked From
Replacement Disc Brake Piston for Dexter 8,000-lb Caliper
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Caliper Parts
- Pistons
- Dexter
more information >
Continue Researching
- Q&A: Replacement Trailer Grease Seal for an NOK AD2527E Seal on a Boat Mate Trailer
- Q&A: How to Find Correct Replacement Braking Assemblies for a 1989 EZ Loader Trailer
- Q&A: Recommended Grease Conversion for Dexter 12k Oil Bath Axles
- Q&A: Replacement Caliper for Tie Down Engineering 46802
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Q&A: How to Pick Out Replacement Pistons for Trailer Disc Brake Calipers
- Q&A: Guide Pin Diameter and Distance Between Holes for Kodiak Disc Brake Kit