Wiring Harness That Provides A 7 Round Pin For 2018 Acura MDX

Updated 06/09/2018 | Published 06/08/2018

Products Featured in This Question

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3535)

$118.67

Mounting Bracket 4-Pole Flat

(6225)

$10.44

Question:

Do you make a wiring harness for 2018 Acura mdx with a 7pin round

asked by: Randy

Expert Reply:

The Universal Installation Kit for Trailer Brake Controller # ETBC7 will provide you a 7 round pin for your 2018 Acura MDX. This kit includes everything you need to install an electric trailer brake controller and 7-way connector. If there's not an existing 4-way flat on your vehicle, you can purchase one separately. The 4-way # 118628 is required for you to install the # ETBC7. The plug-in location is behind the driver side trim panel.

The Exterior mounted plug on some or all models may require an aftermarket electrical mounting bracket # 18144.

It may be necessary to see a local Acura dealer for a relay. The relay is needed to activate the tow package wiring circuit.

If you need a brake controller, Tekonsha Prodigy P3 Trailer Brake Controller # 90195 is one most popular items. This proportional brake controller will activate your trailer brakes in a proportion to your vehicle's braking action. It'll automatically adjust your trailer's braking based on the deceleration of the tow vehicle and it activates immediately so there's no pausing like with your time delay brake controllers. It does have an automatic leveling ability because there's an internal sensor on the inside which will detect deceleration even if the controller is not mounted flat.

expert reply by: Timothy G