How to Mount the Light Guide LED Trailer Tail Light Part # STL603RB
Updated 06/01/2018 | Published 05/30/2018
Products Featured in This Question
Question:
trailer light STL603RB mounting hardware do you sell what it takes to mount the lights.
asked by: Richard
0
Expert Reply:
Yes! In order to mount the Light Guide LED Trailer Tail Light part # STL603RB you are going to want to use the Rubber Grommet for 4" Round Trailer Tail Lights part # A45GB. I have attached an install video of this grommet for you as well. In addition to the grommet you will also need the 3-Wire Pigtail part # A47PB. If you need butt connectors you can use part # DW05743-5.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Light Guide LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 12 Diodes - Red Lens
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 4 Inch Diameter
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: 4 Inch Round Trailer Tail Light Cutout Size
- Q&A: Size Hole Needed to Install 4 inch Trailer Taillight that is Flush Mounted
- Q&A: Wiring Diagram for the Dometic Replacement Single Zone Thermostat
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Will the DeeMaxx Alpha G1600 Electric Over Hydraulic Actuator with 2017-22 GM Brake Controller?
- Q&A: Can Spring Seats Be Moved On A Trailer Axle Tube
- Article: Trailer Tire Sizing
- Q&A: Recommended Straight Mount Spare Tire Carrier For 2" Square Tubing On Trailer
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Trailer Lighting Requirements
- Article: Slipper Spring Trailer Suspension System Review