Are Replacement Parts for Atwood Landing Gear Available or Will Another Brand Fit

Updated 05/29/2018 | Published 05/26/2018

Products Featured in This Question

Replacement Gearbox for etrailer and Ram 5th Wheel Landing Gear

(52)

$70.56

Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear

(148)

$59.25

Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs

(836)

$272.26

Question:

motor and gearbox has part # 70079. shaft that connects to landing gear needs replacing as a piece is sheared off. unit does not seem to be connected to any support and simply hangs between the tubing and the landing gear assembly. Is this right?

asked by: Howard K

Expert Reply:

The division at Atwood that handled the jacks and landing gear was sold off to Lippert so direct replacement parts are not available. But it is likely that the gear box and motor of another brand will still fit. And yes, the gear box and motor do just sort of hang there.

Gear box # RVLG-RDBOX is one possible option. With it you can use motor # M1230. For the driver leg D shaft there were 3 possibilities for Atwood landing gear depending on which model it is (standard duty, heavy duty, super duty, 4K direct and 5K direct). Those parts are not available so your best option is the shaft in kit # LC146059 which may not even work.

Honestly, since Atwood no longer makes jacks you would be better off replacing the system you have. We have kit # RVLG-8HDL. Then you would just need motor # LC142178. This set up won't break the bank!

expert reply by: Michael H