Ball Mount Compatibility with Trailer Hitch Receiver on 2012 Kia Soul

Updated 05/17/2018 | Published 05/16/2018

Products Featured in This Question

Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs

(2273)

$27.94

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(128)

$77.92

1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs

(334)

$34.81

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs

(333)

$39.87

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2273)

$35.71

Question:

I had a Hitch put on my 2012 Kia Soul to haul my tear camper. I dont know how to tell what class the hitch is to tell if this would be compatible. Is there a way to tell?

asked by: Chelsey S

Expert Reply:

There are only Class I trailer hitch receivers available for your 2012 Kia Soul. The Curt Class II Drawbar # C45521 is what is recommended for a ball mount with a Class I trailer hitch, but the # C45014 is also compatible. Class I and Class II hitches are both 1-1/4 inch openings and there are not Class I rated ball mounts.

For either ball mount, you will need the pin and clip # F-4 as well as a hitch ball. For a 2 inch hitch ball I recommend # A-82. For a 1-7/8 inch hitch ball I recommend # A-80.

If you don't have trailer wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118637 which is a confirmed fit for your vehicle. I've attached a video of this installation to assist.