Suspension and Tire/Wheel Upgrade Needed for a 3,500 lb Trailer Axle
Published 05/16/2018 >
Products Featured in This Question
Question:
I currently have a set 3500lb axels with 4” drop spindles they are 5 lug pattern not sure the diameter there are 15” rims now. I really want to go with independent suspension and keep a low overall profile and lightweight. Frame is from a 35’ camper that is striped to frame and will be using about 15’ to 18’ trailer with 4’ tongue
asked by: Ralph B
Expert Reply:
If you already have the axles installed then I would need to know the size of your hub as well as the bolt pattern on your hub as well to make a recommendation. I have attached a helpful article on bolt patterns for you to reference. If you don't know the diameter of your hub just let me know what the weight capacity is and I should be able to help you from there.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - 4" Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Hub Face Measurement for Tire Clearance on 3,500 Pound Timbren Axle-Less Trailer Suspension System
- Q&A: How Far Does the Suspension Travel on the Timbren A35RD545E
- Q&A: Replacement Axle for 1969 Aristocrat Trailer With 4" Drop Spindle and Electric Brakes
- Q&A: Mounting Dimensions of the 3,500 lb Timbren Axle-Less Suspension System # A35RD545E
- Q&A: Availability of CAD Diagram for Timbren Axle-Less Trailer Suspension System # A35RD545E
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: Trailer Wiring Diagrams
- Q&A: Can I Upgrade from 6 Lug to 8 Lug Wheels to Help Increase Weight Rating of my Trailer?
- Q&A: Replacement Axle Needed for a Boat Trailer with 86 Hub Face and 67-1/2 Spring Center Measurements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: No Missteps Here: Best Camper and RV Steps (2022)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Determine Tire/Wheel Diameter








Ralph B.
5/16/2018
I currently have a set 3500lb axels with 4” drop spindles they are 5 lug pattern not sure the diameter there are 15” rims now. I really want to go with independent suspension and keep a low overall profile and lightweight. Frame is from a 35’ camper that is striped to frame and will be using about 15’ to 18’ trailer with 4’ tongue