Replacement Lug Bolts for 1963 Prowler Camping Trailer
Updated 04/30/2018 | Published 04/28/2018
Products Featured in This Question
Question:
I have a 1963 prowler camper which the tire dealer broke of the four lug bolts and I need to find four more. Where can I get them. They are for the left turn. Thank you
asked by: Cris H
Expert Reply:
We have only a couple options for lug bolts, so you will need to confirm the fit on your 1963 Prowler camper. We have 1/2 inch diameter bolts that are 1 inch long with a 60 degree cone # RG02-020 or the 1/2 inch diameter bolts 7/8 inch long with 90 degree cone # RG02-040. Both have a head diameter of 13/16 inches and both have a fine thread.
If this is not the correct fit, I've attached an article to assist with hub replacement based on axle spindle or bearing size. You will need to get specific measurements using a caliper like # PTW80157.
Product Page this Question was Asked From
Trailer Wheel Bolts - 1/2" Diameter x 1" Long - 60 Degree - Qty 4
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Bolts
- 1/2 Inch Diameter
- Fine Thread
- 1 Inch Long
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Do You Have a 2-inch Square Axle Rated for At Least 3,000lbs and Has Idler Hubs?
- Q&A: 5.30R12 Highway Rated Trailer Tire and Wheel Options for Saltwater Use
- Q&A: Replacement Solera Arms for Awning that Measure 63 inches
- Q&A: Axle Riser Kit for Lippert Axles
- Q&A: Difference Between the Camco RV Vinyl Insert 25212 & 25312
- Q&A: 1/2 X 13 Threads Per Inch Vintage Trailer Wheel Bolts
- Q&A: Replacement Tire For A Carlisle Sport Trail LH 5.30-12 On A Jet Ski Trailer
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: How to Raise Your Travel Trailer Height
- Article: How to Measure for Trailer Hitch Drop
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Best Camper Jacks
- Article: Trailer Wiring Diagrams