Trailer Fender Recommendation for a 1999 Bayliner Capri Single Axle Trailer with 15 Inch Wheels

Question

Question:

I would like to know if this will fit my trailer I currently have a 1999 Bayliner Capri trailer single wheel axle with 15 tires wondering if this is a good substitute. Thanks for the help

asked by: Josh S

0

Expert Reply:

The Fulton Plastic Fender, # F008585-2, is designed to fit on single axle trailers with 15 inch wheels, so it would be a good fit for you. To make sure the fender is the right size for your needs, take a look at the dimensions on the product page below the description to ensure proper fit.

If you find you need something different, I have included a link to our fenders for 15 inch wheels for you.

expert reply by: Michael H

0

Gerry C.

7/8/2020

I need two fenders for a 2000 Capri trailer, single axle with 13" wheels. Overall length 42.5" +/-

Chris R.

7/13/2020

I went ahead and linked our full selection of trailer fenders for 13" wheels below. In the length you're looking for the CE Smith # CE19503-2 should work nicely. These black fenders have a total length of 40-1/8".

Helpful Links

dept-pg-trailer_fenders-pt-13_inch_wheels.aspx

Glen

5/14/2024

Looking for 2 fenders for 15 inch wheels 3 stepping places each side and top

Kevin C.

5/24/2024

@Glen If you have a single axle trailer then you can go with the Fulton Single Axle Trailer Fender with Top and Side Steps # F008575. These come with top and side steps and fit 15" wheels.

Answer 1

To attach fenders to the frame of your trailer you would need look at the frame in relation to the fenders now so that you can come up with what would make the most sense. With fenders like the Fulton single axle trailer part #F008585-2 you could use…

view full answer...

Answer 2

The mounting brackets you can use for the Fulton Single Axle Trailer Fender with Top and Side Steps - Silver Plastic - 13" Wheels #F008593 are the Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF11X35W (Pair)…

view full answer...

Answer 3

Thank you for the photos! According to my information and what you sent in, your best option for a replacement fender is the CE Smith Black Fender: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - #CE19503 (Qty 1) CE Smith Single Axle…

view full answer...

Answer 4

We do have a solution for you, however, you will not be able to power reverse lights on a trailer with a 4-pin trailer connector. The reverse lights on a trailer must receive power from the reverse lights on the tow vehicle. To do this, you will want…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Trailer Fender Recommendation for a 1999 Bayliner Capri Single Axle Trailer with 15 Inch Wheels

Featured Help Information

Miscellaneous Media

Continue Researching