Recommended Grommet for Optronics 4 Inch Round LED Light # STL55RB
Updated 04/23/2018 | Published 04/20/2018
Products Featured in This Question
Question:
I am replacing the lights on my car hauler. I see two different 4 inch grommets, one with a notch and one without. Which grommet is correct for LED Light #STL55RB? Or if they both are acceptable to use, what is the difference? do i need the notch for the wire connection point?
asked by: Bob
Expert Reply:
Both the Rubber Grommet # A45GB and the Notched Rubber Grommet # A45GNB that you referenced will fit and work well with the Optronics 4" Round LED Light # STL55RB. The only difference between the two grommets, as you mentioned, is the notched cut out in the lower portion of the unit. This is not necessary for wiring or fitment, but it will allow for a bit of an easier install.
Product Page this Question was Asked From
Optronics LED Trailer Light - Brake, Tail, Turn - Submersible - Round - Red
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Round
- Recessed Mount
- Submersible Lights
- LED Light
- 4 Inch Diameter
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Search Results: a54gb
- Video: The Low-Down on the PVC Grommet for 4" Round Recessed Trailer Tail Lights
- Video: Detailed Breakdown of the Optronics Branch Deflector Bracket for 2-1/2" Round Lights
- Shop: PVC Grommet for Peterson 4" Round Tail Lights - Flush Mount - Black
- Shop: LED Trailer Clearance and Side Marker Light w/ Flange - Submersible - 5 Diodes - Round - Amber Lens
- Shop: 2" Round Grommet - Flush Mount - Open Back
- Shop: PVC Grommet for 4" Round Recessed Trailer Tail Lights - Notched
- Shop: Rubber Grommet for 3/4" Round Trailer Lights - Recessed Mount - Open Back
- Shop: Trailer Tail Light Rubber Grommet, 4" Round
- Shop: Mini Clearance/Side Marker Light w/ Grommet - Submersible - Red LED - Red Lens - 9" Pigtail
- Q&A: Can Optronics GloLight - Sealed, 2 Round Trailer LED Clearance/Side Marker Light be Surface Mounted
- Q&A: What Size Hole Is Needed For Mounting Optronics Trailer Light, # MC57AB, In A Rubber Grommet
- Q&A: 3-Hole Mounting Bracket for 2 Inch Round LED Trailer Marker Lights
- Q&A: Replacement RV Trailer Light Gaskets and Mounting Grommets
- Q&A: What Size Hole is Needed for Installation of 2 inch Round Trailer Clearance Light MC53RB
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: How to Choose a Trailer Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
on Trailer Lights
