Correct Trailer Wiring Harness Confirmed to Fit a 2018 Chrysler Pacifica Hybrid Limited

Updated 04/21/2018 | Published 04/20/2018

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector

(813)

$76.76

etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs

(1382)

$95.20

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(82)

$228.93

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(95)

$99.11

Question:

Hi: According an answer posted on your site by one of your experts the following harness will fit a 2018 Chrysler Pacifica Hybrid Limited: "For wiring you will want to use the Curt T-Connector # C56332 which has been confirmed to fit your Pacifica hybrid as well." Yet when I go to order one and put in this vehicle I received a message that this connector will not work with the 2018 Chrysler Pacifica Hybrid Limited. Which is it? Thanks

asked by: Lou T

Expert Reply:

You are correct that the Curt # C56332 does not fit a 2018 Chrysler Pacifica. The correct Curt wiring for your van is # C56322. I'm guessing the error was made because of how close the part numbers are to each other.

With that being said I recommend using the Tekonsha wiring, part # 118712, that's also confirmed to fit your Pacifica. We usually find the Tekonsha wiring harnesses to be of better quality than the Curt products.

If you don't already have a hitch Curt offers a Class III, part # C13383. It's the only Class III we have that's confirmed to fit the Hybrid model. Then you can use our ball mount kit, part # 989900, which includes everything else you need to tow a trailer with your Chrysler.

expert reply by: Charles S