How to Tell if a Bolt is a Grade 8 Bolt
Updated 04/13/2018 | Published 04/12/2018
Question:
Is this a grade 8 bolt drive type 9/16”-18 x 2.25
asked by: Sy
0
Expert Reply:
If you look at the attached photo of the Kodiak Wheel Bolt # K916WB25 you will notice that it has 6 lines on the head. This is an indicator that it is a grade 8 bolt.
The Kodiak Wheel Bolt # K916WB25 actually has the exact same dimensions as what you are looking for so it would work great!
expert reply by:
Jon G
0
click to enlarge
Product Page this Question was Asked From
Kodiak Wheel Bolt - 9/16" Diameter x 2-1/2" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 9/16 Inch Diameter
- Drive-In Stud
- 2-1/2 Inch Long
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can The Alpha Systems Anti-Wicking Adhesive AL97CV Be Used To Seal The Bottom Of A Slide Out?
- Q&A: Roof Adhesive Recommendation for Polystyrene to Plywood Roof
- Q&A: After Market Under Bed Puck System for a 2018 Chevy Silverado
- Q&A: Can I Swap Out My Kodiak Hub and Rotor for a Deemaxx Hub and Rotor?
- Q&A: Hardware to Use for Securing Replacement Mounting Bracket for Kodiak Disc Brake Caliper
- Q&A: Can 1/2 Inch Wheel Studs be Changed to 9/16 Inch Wheel Studs
- Q&A: How Much More Clearance Under Trailer Using Torsion Axle With Negative Angle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch