Parts Needed to Flat Tow 1978 Toyota Land Cruiser FJ40
Updated 04/13/2018 | Published 04/12/2018 >
Products Featured in This Question
Question:
can i flat tow 1978 toyota fj40 with manual transmission??
asked by: Frank
Expert Reply:
Your 1978 Toyota Land Cruiser FJ40 can likely be flat towed behind an RV but you will want to verify this in your owner's manual, as its possible that your particular model has specific restrictions. If you do not have the manual, you can also check with a local Toyota dealer and they should be able to verify its capabilities and go over any procedures that need to be followed.
We do not have any custom-fit base plates available for the FJ40, but you can use a universal set like the Blue Ox # BX88230 to provide an attachment point for a tow bar. From there, the Blue Ox Alpha Tow Bar # BX7380 is a great option that includes the required safety cables and a self-aligning design to ease hookup.
For a lighting solution, I recommend the Magnetic Towing Light Kit # RM-2120. This is a convenient way to get the signal lights you need for flat towing without having to splice into the vehicle's wiring.
Lastly, you will need a supplemental braking system. I highly recommend the Blue Ox Patriot # BLU37TR. This is an excellent proportional system that will physically press down on the brakes in your Toyota FJ40 at the same time and with the same intensity that you apply to them in your RV.
I have attached video demosntrations on the products mentioned, along with an FAQ on flat towing that you might find helpful.
Product Page this Question was Asked From
Blue Ox Universal Bolt-On Base Plate Brackets - 5,000 lbs
- Accessories and Parts
- Tow Bar Base Plate
- Brackets
- Blue Ox
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Installing Old Tekonsha Weathertronic Electric Brake Controller
- Q&A: Replacement 7-Way Connector Needed for 2007 Nissan Frontier
- Q&A: What gauge wire is recommended when installing Pollak 7 way trailer connector?
- Q&A: How Far Apart Do the Tabs in Blue Ox Bolt-On Base Plate Bracket Kit Need to Be
- Q&A: Replacement Pin for ESCO Trailer Breakaway Kit
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Q&A: Looking For 6-Lug Hubs For Dexter 3,500 lb Idler Axle
- Q&A: Why Does My Blue Ox Ascent Tow Bar Need To Be Level
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: Brake Controller Installation: Starting from Scratch
- Article: Flat Towing Package for 1997 Jeep Wrangler
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: What Is a Supplemental Braking System?




