Dimensions of TorkLift GlowStep Stow N' Go Mounting Bracket TLA7810

Updated 04/11/2018 | Published 04/09/2018

Question:

In answer to another posters Teala question, the Expert answered that bracket TLA7810 is 23inch wide x 7.5inch tall. An accompanying diagram suggested that the inside portion of the bracket is 23. 1 Since the bracket appears to be made of 1/4inch steel...does that mean that the outside width is 23.5, which is the minimum available space widthwise needed to mount the bracket? 2 Would you also confirm that the inside width of the bracket is exactlyinch 23? 3 Last question: What is the diameter of the pins or the holes that the pins fit through that hold the steps to the bracket? Thanks so much.

asked by: Steve J

Expert Reply:

I went to our warehouse and measured the TorkLift GlowStep Stow N' Go Mounting Bracket # TLA7810 to confirm the dimensions you inquired about.

The thickness of the side bracket material is indeed 1/4-inch. The space inside (between) the two side brackets is 22-5/8-inches; the outside width at the side brackets is 23-1/8-inch and the pin hole diameter is 1/4-inch.

expert reply by: Adam R