Weight of TorkLift GlowStep Camper Scissor Steps # TLA7806-8000

Question

Question:

How much do the steps weigh?

asked by: Errol F

1

Helpful Expert Reply:

The TorkLift GlowStep Camper Scissor Steps # TLA7806-8000 referenced in your question weigh in at only around 40 pounds total. This light weight is due to its aircraft-grade aluminum construction.

The actual weight capacity of the steps is 325 pounds. I have attached the written installation instructions that you can also check out.

expert reply by: Chris R

1

Answer 1

I went to our warehouse and measured the TorkLift GlowStep Stow N' Go Mounting Bracket #TLA7810 to confirm the dimensions you inquired about. The thickness of the side bracket material is indeed 1/4-inch. The space inside (between) the two side…

view full answer...

Answer 2

Hello Dean, thanks for reaching out. I do have a good option for you, although we do not have an exact match for the Atwood model R1737BB. Take a look at the GE Profile Propane RV Range #GE24VR. This is a 3 burner gas range with a stainless finish.…

view full answer...

Answer 3

If the steps you have are the Torklift Glowsteps that fold down then yes we have kits can add a step like with the Single Add-On Step part #TLA7501 but if you have a different step setup I would need to know what you have to determine if there's…

view full answer...

Answer 4

Hey Jim! I don't have any information on how wide your door way is for your truck camper but the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear item #TLA8006 are 22" wide and have mounting brackets that are 27-1/2" wide x…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 7

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 10

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hi JD; the Furrion Chill Cube #FR49TD air distribution box has a vent on it you can open and close. See the picture attached below. When it is closed it forces more of the air through the ducted system. Assuming you have a ducted system you will need…

view full answer...

Weight of TorkLift GlowStep Camper Scissor Steps # TLA7806-8000

Product Page this Question was Asked From

Continue Researching