Recommended Double Step Assembly to Replace Single Step Flexco on 2017 Forest River Trailer

Updated 04/10/2018 | Published 04/07/2018

Products Featured in This Question

Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 24" Wide - 300 lbs

(651)

$290.49

Lippert Outriggers for Manual RV Steps

(41)

$80.58

Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 20" Wide - 300 lbs

(651)

$280.43

Question:

What double step will be a direct fit for my 2017 forest river wolf pup 16 BHS? Currently it has a single flexco step.

asked by: Paul H

Expert Reply:

To replace the single step Flexco step assembly on your Forest River Wolf Pup 16BHS Trailer, I recommend taking a look at the Flexco Manual Pull-Out Steps # SMFP-2100. This double step assembly features 9 inch deep, pull-out steps with a non-slip surface to provide sure footing. It has a mounting base that measures 26-1/8 inches wide and 8 inches deep (and a bolt hole pattern of 24-1/2 inches wide and 7 inches deep). I recommend comparing these dimensions to your current assembly to verify if this will bolt right up as a direct replacement.

If you find that your mounting base is smaller, you can also use the Flexco Manual Pull-Out Steps - Double # SMFP-2120. This is the same as the above design, but it features a mounting base that measures 23-5/8 inches wide and 8 inches deep. You can also use new outriggers like # LC301704 if needed.

I have attached a short video demonstration on this step model that you can also check out.

expert reply by: Chris R