Troubleshooting Light Not Working with the Cargo Carrier Light Kit # 52014

Updated 04/09/2018 | Published 04/06/2018

Products Featured in This Question

Cargo Carrier Light Kit For 52017 and 52018

(47)

$30.48

Trailer Light Mounting Bracket for 4" Trailer Lights, Steel - Black Powder Coat

(52)

$4.68

Optronics Trailer Tail Light - Stop, Turn, Tail - Submersible - Incandescent - Round - Red Lens

(2545)

$4.29

Replacement 4-Way Flat Wiring Harness for Hitch-Mounted Cargo Carrier Light Kits

(15)

$10.72

Question:

the turn signal and 4 way lights dont work on one light do I need a new light or am I not doing something right. checked the connections everything else works fine.

asked by: Joe

Expert Reply:

If you installed the Cargo Carrier Light Kit # 52014, and all of the functions on one light are not working then it sounds like the problem is the light itself. If some of the functions worked on the light then I would say that you have a problem with the wiring somewhere.

You can test the light by running a ground to the marked pin and then test the other 2 pins with a 12V power source. If you think that the wiring may be an issue then you can replace it with part # WHCETR1B.

For a replacement light you would need part # ST45RB, and if you needed a new mounting bracket then you can use part # BK45BB. It isn't the same bracket that came with the kit but it will give you more options as to where you can mount the light.

expert reply by: Jon G