Valterra Adjustable RV Sewer Hose Carrier A04-5094 Mounting Bracket Hole Spacing

Updated 04/09/2018 | Published 04/06/2018

Question:

I need the distance between support brackets on the side with two brackets the stationary side Center to center where screws will go. thanks

asked by: John K

Helpful Expert Reply:

The Valterra Adjustable RV Sewer Hose Carrier # A04-5094 has a bracket-to-bracket hole separation of 48-7/8-inches when fully compressed and of 92-1/2-inches when extended to its maximum length. The center to center hole spacing on each individual bracket is 5-1/4-inches.

The third mounting bracket is not fixed to either half of the telescoping tube and it slides to the best position to support the carrier.

Please refer to the linked photo I prepared for you.

expert reply by: Adam R