Will the Americana Metal Bolt-In Valve Stem Part # AM20906 Work with Pressure Pro TPMS Systems

Updated 03/23/2018 | Published 03/22/2018

Question:

I am considering g purchasing four Americana Metal, Bolt-In Valve Stem - 1-1/4inch Long - Over 100 psi. I use a Pressure Pro valve stem TPMS. Will these valve stems inhibit the signal?

asked by: Miles

Expert Reply:

I called a representative of Pressure Pro and they stated that you should have no problem using their TPMS system with the Americana Metal Bolt-In Valve Stem part # AM20906. The only type of valve stem that should be avoided when using the Pressure Pro TPMS system is one that is exceptionally long as that may interfere with the effectiveness of the pressure reading.

I have attached a review video of our valve stem for you. The stem comes with two gaskets: one for a 0.453" pilot hole and one for a 0.625" hole pilot hole. Only one of them will be used depending on your application.

expert reply by: Conner L