Is there a Center Bushing for Equalizer TREQ1304

Updated 03/08/2018 | Published 03/07/2018

Products Featured in This Question

Equalizer for 2" Wide Slipper Springs - 11" Long - 7/8" Center Hole

(171)

$72.01

Nylon Bushing - 9/16" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long - Qty 1

(1186)

$5.73

Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter

(172)

$37.54

Question:

Do you sell the center bushing for these.

asked by: Brandon W

Expert Reply:

The center hole for equalizer # TREQ1304 is 7/8 inches in diameter. The closest match we have to a bushing that will reduce that is # TRBU11568 which has a 7/8 inch outer diameter and 9/16 inch inner diameter. But it is 1-3/4 inches long so it will come up short.

If possible you could just use a 7/8 inch wet bolt, # TRFA71063, provided that the hanger mounting hole is large enough or can be bored out to 7/8 inches safely.

expert reply by: Michael H