Using Weight Distribution and Suspension Enhancement Together on 2012 Ford F-150
Updated 03/05/2018 | Published 03/03/2018 >
Products Featured in This Question
Question:
Hi, I have a 2012 F150 Ecoboost. I tow a 25 foot trailer and use an Equalizer WD hitch. The trailer is approx. 7,600 lbs fully loaded and the tongue weight approx. 800 lbs. The rear suspension rubber or air springs seem like a good idea since I do have some sag in the back of the truck when hooked up. However, reading through your QandAs, you do not recommend using a rubber/air springs in conjunction with a WD hitch. But heres the confusing part: reading through customer reviews, there are quite a few customers that use these rubber/air springs with a WD hitch. Why? A leveled out truck looks nice but safety and performance are both number one. Could you please clarify the use of rubber/air springs with a WD hitch? Thank you
asked by: Douglas H
Expert Reply:
It's easy to see where the confusion may lie so I'll do my best to try and clarify for you.
If there is sag on the rear of your 2012 Ford F-150 that is caused by a heavy load in the truck bed as you are towing with your weight distribution system, then suspension enhancement such as the Timbren # TFR1504D would be a solution.
However, if there is sag without a heavy load and you are towing with a weight distribution system then it is likely that you have either the incorrectly rated system or it is not set up correctly.
The ideal system would be one in which your total tongue weight - the tongue weight of your fully loaded trailer plus the weight of any cargo behind the rear axle of your F-150 - would fall somewhere in the middle of the weight distribution system's tongue weight capacity. So if 800 lbs is your total tongue weight then Equal-i-zer # EQ37100ET, with a tongue weight capacity of between 600 lbs - 1,000 lbs would be the best option for you.
Hopefully that was a clear explanation but if you have any other questions please let me know.
Product Page this Question was Asked From
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Towing/Load Leveling
- Bump Stops
- Suspension Only
- Extra Heavy Duty
- Rear Axle Suspension Enhancement
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can Buyers Products 5/8" Forged D-Ring With Mounting Bracket # 337B40MP Work on Steel Deck Trailer
- Q&A: Rear Helper Springs for a 2012 Ford F-150 4x4 and Forest River Stealth Model 1913
- Q&A: Is There Weight Capacity for Brophy Camper Tie Downs
- Q&A: What To Do When A Weldnut Breaks Off In The Frame While Installing A Timbren SES
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure for Trailer Hitch Drop
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Towing Capacity of a 2011 Ford F-150 with 3.5 Liter EcoBoost
- Q&A: Rear End of 2011 Ford F-150 Still Sags Even with Weight Distribution
- Article: Timbren Suspension Enhancement Systems
- Article: Testing Trailer Brake Magnets for Proper Function




