Mounting For RedArc Tow-Pro Elite on the 2018 Honda Ridgeline  

Yes, the Redarc Tow-Pro Elite Trailer Brake Controller part #RED44FR draws milliamps of power while in sleep mode but it would take much longer, even several months of the vehicle sitting to completely drain the battery usually. The Tow-Pro Elite…

The Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR is a great option for maintaining a clean factory appearance inside the cab of your Honda Ridgeline (not to mention that it also works extremely well to activate the trailer brakes). The…

When powering a brake controller like the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR you have to power it directly from the vehicle battery. Mainly because it would prevent the controller from shorting out any of your vehicle's power…

Yes, there is a port under the dash of your 2016 Honda Pilot for installing a brake controller like our best selling P3 part #90195. All you need is the install harness part #3070-P which is a confirmed fit. I attached an install video that shows…

It sounds like you are missing the fuse in your smaller, secondary under-hood fuse box that powers the brake controller. I checked in a manual for a 2012 Honda Pilot, and it was the number 14 fuse labeled Trailer E-Brake. It should be close if not…

For a brake controller I would recommend the Prodigy P3 Brake Controller part #90195 for basically every towing situation but especially for an electric over hydraulic setup like what you have. This is our best selling brake controller because of how…

To check the pins on the vehicle side 7-Way, you can use a circuit tester or the volt meter. The circuit tester will show you if a signal is coming through on the pin you are testing while the volt meter will tell you that and how much voltage is…

The Prodigy P2 #90885 is an excellent choice, being one of our most popular and easy to use brake controllers of all time. To install the brake controller, first look under the dash under the steering column over the brake pedal as shown in the…

I pulled the Blaylock EZ Lock Coupler Lock, #BLTL-33, from our warehouse and took some measurements for you. The inside width of this coupler lock is 4-3/4 inches. From the base to the bottom of the pin, it measures 3-1/8 inches (see photo). If you…

Sure thing! The EZ Lock Trailer Coupler Lock #BLTL-20 is for Bulldog Collar-Lok-style couplers while the EZ Lock Trailer Coupler Lock #BLTL-33 is designed for Fulton, Shelby, Dutton-Lainson, Atwood, and similar couplers. I've attached some review…

It sounds like you have installed your Redarc Tow-Pro Elite trailer brake controller #RED44FR using the custom GM wiring adapter #3016-S. This is the correct harness for the 2018 Cadillac Escalade with factory 7-way connector. An error code from ANY…

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…