Difference Between Redarc Tow-Pro Elite and Tow-Pro Trail Brake Controllers

Question

Question:

Hello, What is the difference between the Redarc TowPro Trailer with factory tow package and the Redarc TowPro Elite with factory tow package. I have a 2026 Nissan Frontier with the SV package. Thank you, Shauna

asked by: Shauna M

0

Expert Reply:

Hey Shauna,

We kit the Redarc Tow-Pro Elite Brake Controller # RED75KR with the custom harness, so it is the same as The Redarc Tow-Pro Trail Brake Controller # RED94UR other than their physical appearance. I recommend going with whichever is cheaper at the time of purchase since pricing can change from day to day.

expert reply by: Josh B

0

Josh B.

1/27/2026

Hey Shauna, how did things go with choosing between the Tow-Pro Trail and the Tow-Pro Elite for your Frontier? It’d be great to hear which one you went with and how it’s working so far. Your update could make it easier for others comparing the two controllers.

Answer 1

Norm, thanks for hanging out! Along with one fitting different brands of trucks the Trail and Elite are also different. The Tow Pro Trail # RED94UR is designed to be used primarily off-road, specifically engineered and tested for off-road adventures.…

view full answer...

Answer 2

We haven't had the chance to test fit the Redarc knockout mounting panel part #331-TPSI-007 on a 2021 Nissan Frontier but based on how small it is and pictures of your interior I think it would fit easily when you go to install the Redarc Tow Pro…

view full answer...

Answer 3

Hello Thomas, Happy to get the right brake controller set-up for your 2006 Toyota Tundra. I recommend the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional #RED82CR. Since your Tundra has the factory…

view full answer...

Answer 4

Hey Scott, thanks for reaching out. The correct panel for your 2021 Toyota Tacoma TRD Offroad is the #331-TPSI-002. The main difference between the #331-TPSI-002 and #331-TPSI-007 is the different vehicle years they fit. Both of these parts will fit…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Difference Between Redarc Tow-Pro Elite and Tow-Pro Trail Brake Controllers

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching