How to Pick Out Lube Plate for Fifth Wheel Trailer

Question

Question:

What size replacement lube plate do I need for a 2004 everest

asked by: Ronald C

0

Expert Reply:

Normally the lube plate size needed is based on the fifth wheel hitch used and not the trailer. For example the Reese part # RP83002 is a 10 inch diameter plate that is designed for 16 and 22k fifth wheel hitches.

You might just measure what you currently have and go from there.

expert reply by: Jameson C

0

Answer 1

Yes, you can use the Valley 7054 5th Wheel Hitch on your 2018 Ford F-150. There won't be any issues with the aluminum bed. In order to do so you will need an install kit for which I recommend using the Reese Quick-Install Custom Installation Kit…

view full answer...

Answer 2

Yes, you can use the Valley 7054 hitch in your 2001 GMC Sierra long bed. You just need the proper installation kit. You can use Curt custom installation kit #C16418-204. It will accept Curt, Pro Series, Draw-Tite, Hidden Hitch, Reese, Valley, and…

view full answer...

Answer 3

In order to mount the Valley/Husky 7054 5th Wheel Hitch on a 2021 Ram 2500 without in-bed prep package you'll need a kit such as the Curt Custom Fifth Wheel Installation Kit part #C16427-204. I was able to install this kit and if you'd like…

view full answer...

Answer 4

We do not currently have any replacement parts for Valley fifth-wheel hitches like what you have. Valley is no longer in business so it might be hard to find the bushings you need that are compatible with the CP 07054 hitch. Because of this, your…

view full answer...

Answer 5

You sure can! The Valley 7054 5th wheel hitch attaches to industry standard rails just like the Curt E16 item #C16115. Industry standard 5th wheel rails measure 22" from center to center of the rails. I have linked a diagram below so you can…

view full answer...

Answer 6

Hey Lee! I'm not sure what those rails are but if you send me a picture I can take a look. 22" apart is standard and it would also help if you measure the distance between the holes. I attached a picture below with the industry standard base…

view full answer...

Answer 7

In order to use the Demco Hijacker Autoslide 5th Wheel Trailer Hitch part #DM8550022 (6077) on a 2011 Ford F-350 without prep package you'll simply need the Demco Hijacker Premier Series Above-Bed Base Rails and Custom Installation Kit for 5th…

view full answer...

Answer 8

I went to the warehouse and pulled one of the Remote for Air Lift WirelessONE Compressor System, part #AL72704. I have attached a photo of the remote you can check out. On each side of the remote in the areas with the red arrows, there is a small tab…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

How to Pick Out Lube Plate for Fifth Wheel Trailer

Continue Researching