Replacement Landing Gear Legs for Set with Number VMC900R

Question

Question:

Looking to replace my landing gear legs. The number on the cap is vmc900R-388195. Which legs do I need.

asked by: Eldon K

0

Expert Reply:

I spoke with my contact at Stromberg Carlson who confirmed that the Replacement Lead Leg # LG-177202 will work well as a replacement for your Venture VMC900. Then for the matching follower leg you would want the part # LG-177201.

expert reply by: Jameson C

0

Answer 1

The Venture VMC900R is a very common landing gear set so for replacement legs we know you need the part #LC119102 for the lead leg and #LC119101 for the follow leg. Since you are wanting to fix the issue as cost effective as possible I would…

view full answer...

Answer 2

Your 2018 Chevy Colorado has the brake controller wiring ran under the dash of the truck but there isn't an adapter that uses a connector. Reason being there's only 4 blunt cut wires under your vehicle dash for the brake controller wiring and…

view full answer...

Answer 3

You should need repair kit #LG-146059 for the lead leg and #LG-146060 for the follower leg. From the picture you sent in I was able to determine that you have a Venture landing gear set VMC900R.

view full answer...

Answer 4

8,000 lb jacks are going to be the highest rated landing gear sets we offer that will bolt right up to your trailer without modification. For that we have the Bulldog part #BD500162 which would work well. If what you really want something high…

view full answer...

Answer 5

The Fusion LED Trailer Tail Light #STL211RCB is a recessed light that is nearly identical to the GloLight LED Trailer Tail Light #STL1211RCFHPG. With the recessed light #STL211RCB you will need the PVC Grommet #a70gb to fit the recessed hole or…

view full answer...

Answer 6

The trailer light I recommend for you is the Optronics, part #STL211RCB. This is an LED light that has 4-functions, stop, tail, turn, and backup. With the 16 LED diodes it will give you plenty of light you need when backing up. This light does…

view full answer...

Answer 7

Since LED lights prefer clear lenses for maximum brightness the part #STL211RCB that has the clear lens and red diodes would be brighter than the #STL211RB. If you check out the picture I attached you can see how the diodes of the #STL211RCB are…

view full answer...

Answer 8

At first I thought that this light had 2 places for the 3 terminal plugs but if you check out the attached picture of the Fusion LED Trailer Tail Light #STL211RCB you can see that one plug has 3 prongs (for tail light functions) and one plug has 2…

view full answer...

Answer 9

The GloLight LED Trailer Tail Light part #STL1211RCFHPG is a surface mount light which means the flange mounts directly to the surface. The Fusion LED Trailer Tail Light part #STL211RCB is a similar light offered with recessed mount if that's…

view full answer...

Answer 10

For your VMC900R landing gear if you want to replace the lead leg I recommend the Replacement Lead Leg for Stromberg Carlson Landing Gear - 33-1/2" #LG-177202 and then for the follow leg #LG-177201. I've attached a photo of the measurements…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Replacement Landing Gear Legs for Set with Number VMC900R

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching