Bow Roller for 14 Foot Row Boat Trailer
Updated 07/06/2011 | Published 07/05/2011
Products Featured in This Question
Question:
I inherited a 30 year old 14 alumacraft row boat and a trailer that looks about that old. There is no roller on the tongue of the trailer, so right now the boats keel about 1/4 the way back from the bow rests right on the tongue and is rubbing it raw. The back part of the trailer seems fine, and there is a V shaped bow cushion up in front. What would you recommend for a roller on the tongue?
asked by: Steven D
Expert Reply:
The Dutton-Lainson Roller you referenced, part # DL21712 would work fine for you, but the Redline Bow Roller, part # 404800 would probably be a better fit. You would also need the mounting brackets, part # MBSPB and a shaft part # CE10727A.
Product Page this Question was Asked From
Boat Trailer 8" Long Keel Roller by Dutton-Lainson
- Boat Trailer Parts
- Rollers
- Keel Roller
- Rubber
- 8 Inch Long
- Fits 5/8 Inch Shaft
- Dutton-Lainson
more information >
Continue Researching
- Article: Trailer Maintenance Schedule
- Q&A: Recommend 3 Inch Wide Non-Marking Bow Roller for Boat Trailer
- Q&A: Recommended End Cap for Yates 3" Bow Roller for Boat Trailers
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Remove a Pal Nut
- Q&A: Inner and Outer Diameter of the Yates Spool Roller for Boat Trailers
- Q&A: What Are The Dimensions for a Dutton-Lainson Keel Roller
- Q&A: Diameter of Center Section of Yates Keel Roller part # YR800B
- Q&A: What Pressure Should Trailer Tire Rated at 80 PSI Max be Inflated to