Class II Ball Mount with Highest Rise Available for a 2018 Subaru Impreza

Updated 01/31/2018 | Published 01/30/2018

Products Featured in This Question

Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs

(2334)

$33.72

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(14)

$60.22

1-7/8" Hitch Ball - 3/4" Diameter x 1-5/8" Long Shank - Chrome - 2,000 lbs

(4028)

$13.44

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs

(4028)

$11.41

Question:

I am in need of a class 2, 1 1/4inch hitch ball mount with a 7inch rise for my 2018 Subaru Impreza. Do you have such a thing? Thank you.

asked by: Jerry M

Expert Reply:

The Class II ball mount we carry that's closest to the 7 inch rise you need is part # C45014. However, it only offers 5 inches of rise.

I've also attached our article on determining the amount of rise you need. You want to measure from the ground to the top of inside of your hitch receiver on your Subaru. Then compare that measurement with the distance from the ground to the underside of your trailer's coupler. The difference is the amount of rise you need. Just make sure both are parked on level ground before measuring.

If you do end up using the # C45014 ball mount the correct hitch balls to fit use a 3/4 inch diameter shank. You can use # C40018 if you need a 2 inch ball or # C40001 if you need a 1-7/8 inch ball.

The trailer wiring harnesses that fit the 2018 Imrpeza are part # 118744 if you have the 5 door and part # 118629 if you have the sedan.