Carrying Kids' Bikes While Towing a Trailer and Using a Weight Distribution System  

Question:

Expert Reply:

I have some options for you that may work, but unfortunately part # RM-077-4, or any other hitch adapter isn't a viable solution. Specifically, the # RM-077-4 Roadmaster dual receiver is not designed to tow a trailer. I can only be used for flat towing a vehicle with all 4 wheels on the ground. When flat towing there is virtually no tongue weight from the towed vehicle. Also, a hitch adapter that extends the hitch reduces the tongue weight capacity of the hitch and therefore effects the functionality of the weight distribution system. So you aren't able to use weight distribution when extending your hitch receiver.

One option to consider is using the Stromberg Carlson Bike Bunk, part # CC-275. It installs onto your trailer's frame and provides an elevated receiver to use a bike rack in. Since you're using weight distribution you may not have room for the Bike Bunk on the frame. It just depends on how everything fits on your trailer.

Another option, that doesn't utilize the trailer at all, is to mount the bikes on the roof of your Yukon. I've linked our selection of roof racks to fit, if you want to look into this option. You need to select the roof style you have on your vehicle to narrow down the selection.

Finally, my favorite of the options is to add a hitch receiver to the back of the Rockwood using part # 13703. It's the most universal RV hitch we carry because it fits trailer frames ranging from 22 to 72 inches wide. Then you can carry the bikes on the back of the trailer. The only catch here is you want to make sure the bike rack you're using is rated for RV and trailer use. I've linked our selection of bike racks that are approved on the back of a trailer. Not all can because of the additional stress placed on the rack caused by the increased movement.

expert reply by: Charles S

0