How to Clear Out of Stroke Error Message in Lippert Ground Control 3.0 Leveling System LC358590

Updated 01/08/2018 | Published 01/06/2018

Question:

I own a 2015 Spartan 300 model 3712X with a lippert 3.0 6 point leveling system. After unhooking from the truck I lowered the front landing gear to level unit. I went a bit too low and when I tried to raise the unit the error mesage says the left leg in out of stroke. The landing gear is only extended approx. 3 to 4 inches. If I jack the trailer up with a hyd. jack to take the weight off of the landing gear it will extend until it starts to take the weight of yhe trailer. What can be wrong?

asked by: Dave

Expert Reply:

To clear the Out of Stroke error message in your Ground Control 3.0 Leveling System # LC358590 you can extend all of the jacks in the system at least 6 inches. Then press and hold the retract button until the jacks start to retract. All of the jacks should fully retract and the error should be cleared.

expert reply by: Adam R