Recommended Demco Kar Kaddy Dolly Replacement Wheels and Tires

Question

Question:

this is an older often called vintage kar kaddy dolly by demco. as best i can measure the center hole for axle is about 2 3/4 inches. the stud holes are about 2 3/4 inches apart, would the9296 rim fit this dolly? i need a spare.

asked by: Bob

0

Expert Reply:

The Replacement Wheel for Demco Kar Kaddy 3 Tow Dolly - White # DM09296 will fit the measurements you gave as the older style had significantly different measurements. I reached out to my contact at Demco to confirm this wheel fit with the dimensions you gave.

Demco has a unique bolt pattern that is 5 on 115 mm or 4.525 inches. They do this to ensure proper fit of their wheel with a 42 mm offset is used an not any other product that may cause the dolly to not function correctly.

If you want tires to go with these wheels, we recommend the # AM10234 that is recommended by the manufacturer. I also recommend the Americana Rubber, Snap-In Valve Stem - 1-1/4" Long # AM20903 for this application.

expert reply by: Jason S

0

Answer 1

Currently Goodyear is one of the few trailer tire manufacturer that makes tires in the USA and the only one that we carry. Unfortunately they do not currently offer a tire size of 235/80-16.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Hi Jerry, For your 2025 Kia Sorento PHEV you would need the Curt Trailer Hitch Receiver #C37RV for the trailer hitch. The right light kit for your Sorento is going to depend on a few factors. For models with the tow package, like you stated you have,…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Recommended Demco Kar Kaddy Dolly Replacement Wheels and Tires

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching