Bolt Diameter That Comes with Valterra Bladex RV Waste Valve Seals

Question

Question:

Can you please tell me the bolt size or diameter of these bolts? Thanks.

asked by: Joe B

1

Helpful Expert Reply:

I went out into our warehouse and grabbed a set of the # T1001-9VP and found that the bolt diameters are 3/16 inch exactly.

expert reply by: Jameson C

1

Kurt B.

3/21/2024

Hi Jameson C, What length where they? Kurt

Jameson C.

3/28/2024

@KurtB They are right at 1-1/2 inches long.

Answer 1

Hey Douglas, The Valterra Bladex RV Waste Valve Seals #T1001-9VP are slightly larger (thicker) than the LaSalle Bristol gate valve seals so you while you could get them to fit you'd likely have a leak over time. Your best bet would be to replace…

view full answer...

Answer 2

Go ahead and send me the pictures and I'll take a look to see which 1-1/2 inch Valterra seal you would need. The biggest visual difference is that the new Bladex Style part #T1001-9VP has a small lip on one corner of it that's used for…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 5

Hi Joe, I am happy to help you find the pins you are looking for. it sounds like you’re looking for the pin that secures your Blue Ox Alpha tow bar to the hitch, for that you can use a standard 5/8 inch hitch pin like part #ML1465DAT which will work…

view full answer...

Answer 6

Hey John, thanks for the picture that looks like it came from the instructions and your thermostat. You do need to move the first and last dipswitches up and that will allow both the furnace and the heat pump to function.

view full answer...

Answer 7

Hey Robert, the only frame mounted base plate kits we have for your 2021 Jeep Wrangler Unlimited like the Roadmaster part #RM-521453-5 require either the factory steel or plastic bumper to verify for sure they will work. For aftermarket bumpers you…

view full answer...

Answer 8

Hello James, I’m really glad you reached out, you’re not alone in dealing with a dim, fading Aladdin/backup screen, and the good news is there is a clean, reliable replacement that keeps the functionality you already rely on. Your current Voyager…

view full answer...

Answer 9

Welcome back, Jerry! While a little play is fine, if you are getting a lot, that would be something else. If you used the #6 spacers from the instructions (which are the ones that fit the larger bolts), you could try using the #7 spacers to take up…

view full answer...

Answer 10

The Alpha 2 is indeed an updated version. The difference between the original Blue Ox Alpha and the #BX7380 Alpha 2 tow bar is that the Alpha 2 has non-binding latches, while the original Alpha did not. Non-binding latches, are just that, they easily…

view full answer...

Answer 11

Hey David Good day to you too! The first thing you need to flat tow your 2021 Jeep Wrangler Unlimited is a base plate kit confirmed to fit it like the Roadmaster Direct Connect #RM24VR. In addition to the base plates, you will also need a compatible…

view full answer...

Answer 12

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Bolt Diameter That Comes with Valterra Bladex RV Waste Valve Seals

Product Page this Question was Asked From

Continue Researching