Front Mount Trailer Hitch Receiver 1995 Chevy K2500

Question

Question:

need a front receiver hitch for my 1995 chevy 2500 4x4.

asked by: James

0

Expert Reply:

I have two front mount trailer hitch receivers for your 1995 Chevy K2500. You can choose from either the Curt Front Mount Trailer Hitch Receiver part # 31042 or the Draw-Tite Front Mount Trailer Hitch Receiver part # 65005. Both trailer hitch receivers are a custom fit, have identical weight limitations, and have a 2" hitch receiver tube opening.

The only difference between the two hitch receivers besides brand is that Draw-Tite is made in Mexico and Curt is made in the U.S.A.

expert reply by: Conner L

0

Answer 1

The Curt Front Mount Trailer Hitch Receiver #C31014 is the only front receiver that we currently offer for your 2001 Ford F-350 that does not require you to remove the front bumper. For it to mount your F-350 must have the blocker beam on the front.…

view full answer...

Answer 2

The Silverado designation describes a trim class on the C/K series Chevy pickups in the 1994 model year. Front hitch #31042 is a fit for all C/K models in this year as long as they have four wheel drive and do not have a 34 inch wide frame. If your…

view full answer...

Answer 3

The Lippert Equa-Flex #LC145546 is the closest cushioned equalizer from Lippert to fitting your Grand Design 2800BH. This particular kit is rated for 5K-8K axles. The MORryde CRE3000 #MR27ZR is going to be the best option for your camper. While this…

view full answer...

Answer 4

The length from the inside of one mounting bracket to the other is 27" on the Curt Front Mount Trailer Hitch Receiver #31540. Distance from mounting holes center to center is 30" and the mounting plate thickness is 5/16". Refer to the…

view full answer...

Answer 5

The 1/2"-20 lug nut that I would recommend is the Kodiak Trailer Wheel Lug Nut #KALN1375S. The reason I recommend this lug nut is because it is a one piece, stainless steel design. So it is going to be the most durable and allow you to use…

view full answer...

Answer 6

We currently have two front mount trailer hitch receivers for your 1996 Chevrolet K1500, the Draw-Tite Front Mount Trailer Hitch Receiver part #65005 and the Curt Front Mount Trailer Hitch Receiver part #31042. They both have a 9,000 lb line pull and…

view full answer...

Answer 7

For your 1999 GMC 2500 HD with 4WD, I recommend the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65005. This receiver is rated for 9,000 lbs line pull, vertical load of 500 lbs, and gross trailer weight of 5,000 lbs. I also…

view full answer...

Answer 8

The correct front mount trailer hitch for your 2000 Chevrolet Silverado 2500 LS will be dependent on if you have a 2WD or 4WD model. If you have a 2WD then you will want to use the Curt Front Mount Trailer Hitch Receiver part #31043 but if you have a…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Front Mount Trailer Hitch Receiver 1995 Chevy K2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching