How to Know if Landing Gear Set # RVLG-8HDL Will Fit 2001 Sunnybrook 31BWFS

Updated 09/18/2017 | Published 09/17/2017

Question:

I have a 2001 sunnybrook 31bwfs, and I need new landing gear. I want to take all the old ones out and just replace it with these manual ones. I would like to know if they would fit and work. My mounting brackets are already welded to the frame thanks.

asked by: Alfred

Expert Reply:

In order to pick out a direct replacement for the landing gear on your 2001 sunnybrook 31bwfs we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Tandem Landing Gear Set # RVLG-8HDL. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets of the # RVLG-8HDL.

I attached a picture that shows the dimensions that this landing gear set would fit with.

The jacks would be the correct replacement for Lippert, Venture, and Atwood landing gear, as well as those from a few other manufacturers. The sure way to tell is that if the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) is 17-1/2 inches. If this is the case, the landing gear should fit just fine.

expert reply by: Jameson C