Recommended Trailer Hitch and Installation Process For 2017 Kia Sorento
Question:
Interested in getting a hitch for kia sorrento 2017. Is there enough room to install the hitch without putting the car on a life or risers?
asked by: Steven K
Expert Reply:
Starting with the trailer hitch itself, I recommend the Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75908 for your 2017 Kia Sorento. This Class III hitch is confirmed to fit your vehicle and will use existing holes in the vehicle frame for a no-drill installation. I recommend this over the Curt alternative that is also confirmed to fit your vehicle, because unlike Curt, Draw-Tite does not require the use of additional stabilizer straps for non-trailer loads like bike racks and cargo carriers.
There may be enough clearance under the Sorento to install the hitch without lifting it, however I strongly recommend lifting the vehicle in some way during installation. This is going to make everything much easier, as there is not going to be much clearance for torquing down the hardware and putting the hitch into place. Also keep in mind that for your vehicle, some underbody panels/fascia will need to be temporarily loosened or removed. The exhaust will also need to be temporarily removed during installation.
I have attached an installation video on your 2017 Kia Sorento that you can use for reference and see exactly what all is needed for installation.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Recommended Trailer Hitch For A 2023 Toyota Highlander XLE
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How Do I Tell if My Hyundai Santa Fe Has a Tow Package?
- Article: Trailer Maintenance Schedule
- Article: 2023 Holiday Must Haves
- Q&A: Best Trailer Hitch, Trailer Wiring Harness and Ball Mount for 2020 Hyundai Santa Fe
- Q&A: Recommended Trailer Hitch for 2019 Hyundai Santa Fe
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Which Hitches are Made in the USA
- Q&A: Comparing Curt # 13195 and Draw-Tite # 75908 for 2017 Kia Sorento
- Q&A: How to Determine if 2016 Kia Sorento Has Factory Tow Prep Package
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch