4-Way Connector to Power Motorcycle Trailer Lights

Updated 09/06/2017 | Published 09/03/2017

Products Featured in This Question

20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground

(336)

$18.04

Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID

(71)

$1.17

Wire Loom, 1/2" Diameter (per Foot)

(300)

$2.57

Curt 4-Way Flat Wiring Connector Cover

(277)

$3.40

Question:

Which of your wiring harnesses would best be used to connect the following trailer lights: tail, brake, turn signals, markers amber fwd, red aft and license plate. Did I leave any lights out? I will be towing a motorcycle trailer with a ford f-150 with factory 4-way. Does not have a brake control. Thank you

asked by: Floyd B

Helpful Expert Reply:

To power up the lights on your motorcycle trailer, you would want to use 20 ft. Wishbone 4-Way Trailer Wiring Harness with 30" Ground Wire # A20WB. This harness has all the wiring necessary to empower each of the lighting functions on your motorcycle trailer.

I also recommend using wire loom # 459075-1 and ring terminals # 44-5310A to make the installation an easier process, as well as 4-way connector cover # C58200 to protect it from being damaged.

expert reply by: Kyle S