Can Dutton-Lainson B3503 Brake Winch be Used with a Boat Lift and Big Wheel Instead of Handle

Question

Question:

Can I take the handle off this winch and put on the wheel that I currently have on my winch?

asked by: Bob B

0

Expert Reply:

Yes, Dutton-Lainson Heavy Duty Brake Winch, TUFFPLATE Finish, Self-Locking, 3-1/8" Drum - 3,500 lbs. Item # DL24844 can be used for boat lift applications and will accept the big wheel that replaces the handle.

expert reply by: Michael H

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 3

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 4

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 5

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 6

Hey Kris, the Dutton Lainson winch part #DL15440 does not come with a strap so you will need to order one with it. The part #DL24250 will work great with this winch as it is correct width, is 25 feet in length, and has a capacity of 3,700 lb WLL and…

view full answer...

Answer 7

That is definitely a boat lift winch you have and it is definitely made by Dutton-Lainson. They have several winches designed for boat lifts and those winches are compatible with the big wheel you have. These include the following: Heavy Duty Brake…

view full answer...

Answer 8

Hey Chris, I recommend checking out the Dutton-Lainson Hand Winch w/ Automatic Brake #DL15761 which has a slightly higher weight rating at 2,500 lbs and has a 9-3/8" long handle. The handle is a bit long, but it's positioned on one end of…

view full answer...

Answer 9

The best option we carry for a 10,000 lb boat is the Fulton High-Performance 2-Speed Trailer Winch #F142430 which has a 3,700 lb capacity with Cable #FWC7500100. The winch to boat size capacity is 2-to-1 though it can also be 3-to-1 if you have…

view full answer...

Answer 10

You can use a Dutton-Lainson hand winch for your boat lift, and the easiest one for lifting a 1,700 lb load will have an automatic brake, and a smaller reel hub diameter. A smaller diameter means a shorter cable, but quicker pulling speed. And while…

view full answer...

Answer 11

There is no difference between the Dutton-Lainson Hand Winch DLB2500A and the Dutton-Lainson Hand Winch part #DL15721. The DLB2500A simply represents the model number whereas the DL15721 represents the actual part number. They are the exact same…

view full answer...

Answer 12

As long as your winch is a Dutton Lainson B series winch, you can use the #DL6456 socket on it. The socket fits in 1/2" drill and measures 13/16" x 13/16" (outside). The number that you mentioned is just a number used to identify the…

view full answer...

Can Dutton-Lainson B3503 Brake Winch be Used with a Boat Lift and Big Wheel Instead of Handle

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching