Determining Axle Length for 6 Foot 6 Inch Wide Trailer
Updated 08/17/2017 | Published 08/16/2017 >
Question:
How long of an axle should i get for a 6 6 wide trailer?
asked by: Ian
Expert Reply:
The correct length for the axle on your 6 foot 6 inch wide trailer will depend on a couple of items.
When determining the axle length, you will want to take into account the width of the tires/wheels you intend to use, along with the spindle length. With this in mind, you will want to start with the overall width of your trailer and its fenders/wheel wells, then subtract the widths of your two chosen wheels and the lengths of the two spindles to determine the axle tube length.
If you are just looking to replace an existing axle on your trailer, you will want to measure the existing unit from the hub face (surface where wheel attaches) to the opposite hub face. Then to ensure a compatible replacement, you will also measure from the center of the leaf spring to the center of the other leaf spring. For example, the Dexter Trailer Axle # 35545I-EZ-89 has a hub face length of 89 inches and a spring center dimension of 74 inches.
I have attached a link that will take you to our available selection of trailer axles that you can look through.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Shackle Bolt For Double-Eye Springs - 9/16" Diameter - Plain - 3" Long
- Shop: 2-3/8" Round Trailer U-Bolts (Qty 2)
- Shop: Locknut for Trailer Shackle Bolt - 9/16" Diameter
- Q&A: Recommended Trailer Axle for 6 Foot Wide Trailer
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Q&A: Replacing Bent 3,500lb Axle In 2001 Nash 18FM Travel Trailer 6 Lug
- Q&A: Do You Have a 3,500 lbs Overslung Axle w/ a 86" Hub Face and a 68-1/2" Spring Seat?
- Q&A: Availability of 89" Long 3,500 lb Axle With 70" Spring Center Measurement
- Q&A: Can I Back Up With The DA75 Demco Brake Actuator DM33CV?
- Q&A: Coupler Lock Recommendation For Dexter DX7 Coupler
- Q&A: Which Paint Or Rust-Preventative Coating Is Used On DA75 Demco DM28CV And DM33CV?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Measure a Trailer Axle
- Article: Hyk Outdoors Teardrop Campers: Happy Camping Without the Hassle
- Article: Hitch Anti-Rattle Devices: The Ultimate Guide
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Lighting Requirements

