Needing Replacement Wheel Studs for 2006 Lund 14 Ft. Trailer
Updated 08/04/2017 | Published 08/03/2017
Question:
I have a 2006 Lund 14ft row boat that came with a karavan trailer..the wheel studs were stripped. I need to replace them...on top of the studs it is etched these numbers..... 6109 SJ Do you carry a replacement for this wheel stud?
asked by: Russ D
Expert Reply:
We carry a variety of different sizes in wheel studs and the number that you provided did not cross to anything in our system.
The diameter and length of the wheel stud will be needed. Using a digital calipers like # PTW80157 can help you find these measurements.
I have attached a link that will take you to our page that has all of our wheel studs. When you find the correct size you need you can pick out what you will need from this page.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Dimensions of CES38WR Spindle
- Q&A: Greasable Shackle Bolt that is 3-1/2 inch Long and 9/16 inch Diameter
- Q&A: Looking For Replacement Leaf Springs For Sure-Trac Pro Series Trailer
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub