Recommendations to Reduce Height on First Step for Coachmen Trailblazer Toy Hauler
Updated 07/31/2017 | Published 07/28/2017
Products Featured in This Question
Question:
I just purchased a coachman trailblazer 26th toy hauler. My mom is 79 and lives with me. Dad died 2 yrs ago from brain ca. The bottom step is to high for her. The box is 26 1/4 wide and the distance to the ground is 26 to 30 inch depending on the parking spot level. I need more stable steps for her safety. Do you have any suggestions.
asked by: Tammy H
Expert Reply:
It sounds like going from the existing 2 step assembly on your Coachmen Trailblazer Toy Hauler to a 3 step assembly will be the best option for reducing the height of the first step. I recommend looking at the TorkLift GlowStep Revolution Scissor Steps # TLA8103. This 3 step assembly has a mounting base dimension of 25-7/16 inches wide and 12 inches deep, which is the closest box dimension to the measurement you provided that we currently have available. This is an extremely nice system that features a release lever for easy operation and glow tape on the steps to provided a lighted surface for nighttime use. A compatible Handrail # TLA7621 can also be added.
I have attached a video demonstration on this product so you can see exactly how it will work.
Another option that will allow you to keep the existing steps on your toy hauler is a sturdy platform step like the Stromberg Carlson # S-150. This is a nice, compact step with a non-skid surface and an adjustable height from 4 inches to 8 inches. The step can simply be placed on the ground before the first step on your toy hauler to bridge the gap and make for easier climbing. This also features a nice foldable design for simple storage when not in use. The step itself weighs only 16 pounds.
I have also provided a video demonstration on this product for you to check out.
Product Page this Question was Asked From
TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 3 Steps - 25-1/2" Base - 375 lbs
- RV Steps
- Towable Camper
- Pull-Out Step
- 22 Inch Wide Step
- 25-1/2 Inch Wide
- 3 Steps
- 7-1/2 Inch Drop/Rise
- 26 Inch Entry
- 27 Inch Entry
- 28 Inch Entry
- 30 Inch Entry
- 32 Inch Entry
- 34 Inch Entry
- 36 Inch Entry
- Aluminum
- TorkLift
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: tla8103
- Shop: Alumi-Tread Manual Pull-Out Step for RVs - 9" Drop/Rise - 24" Wide - Triple - Aluminum
- Video: Hands-On with the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear
- Q&A: How to Reset Zero Point Calibration on Lippert Ground Control 3.0
- Q&A: Weight of Brophy Aluminum and Steel Scissor Steps
- Shop: TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 3 Steps - 25-1/2" Base - 375 lbs
- Shop: MORryde Quick Connect RV Steps for 21-1/2" to 27-1/2" Entry Height - 2 Steps
- Shop: Lippert Manual Pull-Out Step for RVs - Triple - 9" Drop - 25-1/2" Wide - Steel - 300 lbs
- Shop: TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 2 Steps - 20" Wide - 375 lbs
- Shop: Race Ramps Trailer Step - 15-1/2" Lift - 24" Long - Qty 1
- Shop: Utopia RV Kitchen Faucet - Single Lever Handle - Matte Black
- Q&A: Triple Step Manual Pull Out Step Recommendation to Fit a 25-1/2 inch Mount Space
- Q&A: Will the MORryde Short Safe-T-Rail Telescoping RV Hand Rail Work on a 2014 Keystone Avalanche?
- Q&A: Is Furrion Vision S+ Direct Replacement for Vision S
- Q&A: Replacement Motor For Lippert Stabilizer Jack
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Q&A: Availability of Heat Strip or Heat Pump for Furrion Chill Cube RV AC
- Article: Best RV Roof Vents
- Article: Determining Trailer Tongue Weight
- Article: Trailer Lighting Requirements
- Article: How to Measure for Motorhome Steps
- Article: Big Truck Big RV
- Article: How Many Batteries Do You Need to Run RV Air Conditioner?