Recommended Axle For Small Trailer Build

Updated 07/27/2017 | Published 07/26/2017

Products Featured in This Question

Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Drop - 4 Bolt Flange - 2,000 lbs

(164)

$914.01

Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased

(369)

$124.60

etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K

(3032)

$145.30

Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased

(1717)

$107.10

Question:

I am building a 10foot x 5foot trailer to build my camper on think Geo Pro 12RK. I am looking to keep it as low as possible to the ground. Total weight is loaded is going to be approximately 1500 lbs. If I need 1 1/2inch side wall clearance and trailer is actually 5foot 4 1/2inch wide, and 3inch spring movement what axle do I use? Do you carry something that meets these numbers?

asked by: Peter L

Expert Reply:

For your custom build trailer, I recommend the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Drop Spindle - Regular Tires - 2,000 lbs # ASR2KHDS05. This will keep your spacing for your tires set and allow you that custom width with a perfect fit. The 4 inch drop will also get it lower to the ground. This also takes care of your suspension needs.

For compatible hubs, I recommend the Trailer Hub and Drum Assembly - 3,500-lb Axles - 5 on 4-1/2 - E-Z Lube # AKHD-545-35-EZ-K along with the brake assemblies # AKEBRK-35-SA.

If you don't want trailer brakes, then I recommend the Trailer Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-1/2 # 84545UC1-EZ which are a confirmed fit for these spindles.

expert reply by: Jason S