Can a Wheelchair be Safely Secured and Transported Long Distances on a Curt Cargo Carrier
Updated 07/27/2017 | Published 07/26/2017 >
Products Featured in This Question
Question:
I need a carrier for one light weight wheelchair, I do not need a ramp. Would the low side rails be enough to strap it down? Or is there some other accessory I would additionally need. Plan on driving from Iowa to florida in the winter are there wheelchair covers?
asked by: Alicia K
Helpful Expert Reply:
24x60 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs Item # C18152 will work great to carry a wheelchair. As long as you tie down the chair to the carrier the low side rails will not be a problem. Just use Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 2" x 10' - 1,100 lbs - # EM34416 and that chair won't budge!
This carrier is designed to fit a 2 inch receiver opening. If you have a 1-1/4 inch opening I recommend 17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs # C18145. I have included links to video reviews on both of these carriers and the straps for you. note: If used on a 1-1/4" hitch, the capacity is only 300 pounds and not 500 pounds.
There may be wheelchair covers out there but we do not have any. If you cannot find one then I recommend using a small tarp (the smallest we have is 5 x 7 feet # EM56999 ) to wrap around the chair and then use bungee cords such as # EM06623 to keep the tarp tight around the chair. You do not want the tarp to be able to flap around much while driving because that can damage it. The vehicle will block most of the wind though so just make sure it is tightly wrapped
Product Page this Question was Asked From
Curt 60x24 Hitch Cargo Carrier for 2" Hitches - 500 lbs Capacity - Matte Black
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- Hitch Mount
- 500 lbs
- Fits 2 Inch Hitch
- 60 Inch Long
- Cargo
- Generators
- Lawn Equipment
- Steel
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Best RV Rated Cargo Carrier Option for Cooler, Generator and Bikes
- Article: Best Hitch Cargo Carriers
- Q&A: Can a Trailer hitch Mount Cargo Carrier be Used at the Back of a 5th Wheel Trailer for Generator
- Q&A: Recommended Cargo Bag for Pro Series # 63153 Cargo Carrier
- Q&A: Which Hitch is Better for a 2025 Kia Telluride SX-Prestige X-Line? The etrailer or B&W?
- Q&A: Does etrailer Trailer Hitch Receiver for 2018 Dodge Journey Include Fishwire
- Q&A: Do You Have a Cover for the 24x60 etrailer Enclosed Cargo Carrier for 2" Hitches, and Anti-Wobble?
- Article: Trailer Wiring Diagrams
- Article: Hitch Mounted Cargo Carrier Information
- Article: Rooftop Cargo Carriers
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: The Ultimate RV Camping Checklist for Your First Year RVing





