Overall Width of TorkLift GlowStep Camper Scissor Steps w/Landing Gear TLA7802-8000

Question

Question:

What are the outside to outside dimensions?

asked by: Jerry

0

Expert Reply:

According to TorkLift the overall width of TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 2 Steps - 20" Wide - 350 lbs Item # TLA7802-8000 is 21 inches.

expert reply by: Michael H

0

Answer 1

The install and removal of the step portion of the GlowSteps part #TLA7802 is pretty easy and does not require the use of any tools. Basically you just pull out cotter pin and then slide the pin out and you can remove the steps from the bracket. No…

view full answer...

Answer 2

I attached a picture of a similar set of the TorkLift GlowStep Scissor Steps as the part #TLA7802 that you referenced in the stowed position.

view full answer...

Answer 3

In regards to the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7833, there is indeed a 6-1/2" gap between the first/last step and the mounting plate. This is needed in order for the steps to fully retract. It is not the intention of…

view full answer...

Answer 4

The TorkLift GlowStep Camper Scissor Steps w/ Landing Gear #TLA7802-8000 you're looking at will work with 20" entry heights like what you have on your Artic Fox, the only other measurement you're going to need is the mounting bracket…

view full answer...

Answer 5

The bolts you show will work with the TorkLift GlowStep Camper Scissor Steps - 2 Steps - Aluminum - 20" Wide - 375 lbs #TLA7802. The attachment bracket will work for this application. If you want to replace the pins with locks, you can use Pin…

view full answer...

Answer 6

Hey Robert, thanks for all of the info you mentioned on your 2017 Lance 1475 travel trailer. Based on that the Torklift GlowStep Camper Scissor Steps part #TLA7802-8000 is a correct fit. What steps do you have currently?

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 9

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 10

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

view full answer...

Answer 11

Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…

view full answer...

Overall Width of TorkLift GlowStep Camper Scissor Steps w/Landing Gear TLA7802-8000

Product Page this Question was Asked From

Continue Researching