Find The Correct Bearing And Seal Replacements For Trailer
Updated 07/07/2017 | Published 07/06/2017
Question:
I have a cargo mate trailer by forest River. I want to find out what bearings and seals that I need to have on hand as spares for it. Vin # xxxxxxxx
asked by: Timmy
Expert Reply:
Unfortunately I can't get that information based on your Vin #. You will need to pull your hub and check the bearing numbers printed on the face of both the inner and outer bearing of your hub. You will also need the seal number. If you pull the hub and can't find the numbers, you will need to measure your spindles at those locations with a caliper like # PTW80157 at those locations on your spindle. I've attached an article as well as a photo to assist.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How Can I Identify an Axle Without a Sticker?
- Q&A: Dimensions of CES38WR Spindle
- Q&A: Greasable Shackle Bolt that is 3-1/2 inch Long and 9/16 inch Diameter
- Q&A: Looking For Replacement Leaf Springs For Sure-Trac Pro Series Trailer
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub