Recommended Bearing Buddy For railer Idler Hub Assembly # AKIHUB-440-2-G-2K
Updated 07/03/2017 | Published 06/30/2017
Products Featured in This Question
Question:
Is there a Bearing Buddy that fits this hub and if so what size?
asked by: Bob S
0
Expert Reply:
The Bearing Buddy Bearing Protectors I recommend you use with the # AKIHUB-440-2-G-2K hub assembly is part # BB1980A.
These protectors keep dirt and water out of the hubs and bearings and are designed to work with the # L44610 race that comes with the # AKIHUB-440-2-G-2K hub assembly.
expert reply by:
Jeffrey L
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How Much Distance Should I Have Between The Tire And The Trailer Frame?
- Q&A: Can I Replace Leaf Springs With Lower Rating For Better Ride Quality
- Q&A: Looking for Replacement 5 Lug Hub with Bearings L44649 Pre Greased
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Idler Hub Assembly for 1-1/16 Inch Diameter Spindle With Seal 1-1/4 Inches at Spindle
- Q&A: Should There Be a Washer Between Outer Bearing and Castle Nut on etrailer 2,000 lb Trailer Axle
- Article: Trailer Tire Sizing
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)