Replacement Trailer Hub Assemblies For A 1976 Valley Forge
Updated 06/29/2017 | Published 06/28/2017
Products Featured in This Question
Question:
I have a 1976 Valley Forge coleman pop up trailor ....I looking for hub assembly its 4 bolts with 20.5x8x1 rims
asked by: Mike T
Expert Reply:
I do have options for you however, in order to recommend the correct hub assemblies for your 1976 Valley Forge, I would need to know the inner and outer bearing numbers located on the inside edge of the bearing or if these are not visible, I would need you to use a digital caliper such as the Carbon Fiber Digital Caliper part # PTW80157 to measure both the inner and outer bearing seats on your spindle. I have attached a video that will further explain this process.
If your current hubs use the L44643 bearing and have a 1" inner and outer bearing seat diameter on the spindle, then you will want to use the Trailer Idler Hub Assembly part # AKIHUB-440-2-1K.
If your current hubs use the L44649 bearing and have a 1.063" inner and outer bearing seat diameter on the spindle, you will want to use either the CE Smith Trailer Hub Assembly part # CE13110 or the CE Smith Trailer Hub Assembly part # CE13109.
I have included a review video for each of these trailer hub assemblies for you.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Q&A: How to Determine the Replacement Hubs for a 2002 Magic Tilt Trailer
- Q&A: Kodiac Disc Brake Kit Compatibility with UFP DB-42 Axle
- Q&A: Diameter of Spindle Washer # SW1000 and Wobble Roller Retainer Ring CE10981
- Q&A: How to Choose the Correct Size Trailer Winch For a Boat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Will Installing Trailer Hitch on 2020 Nissan Murano Keep Hands Free Liftgate From Working
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Troubleshooting Trailer Bearings that Fit Almost Too Tight to Install
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements