Replacement Hardware Kit for Curt TruTrack Weight Distribution Hitch C17500

Updated 06/27/2017 | Published 06/26/2017

Products Featured in This Question

Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW

(623)

$609.95

Replacement Hardware Kit for Curt TruTrack Weight Distribution System w/ Sway Control - 5K to 10K

(22)

$42.05

Question:

Hello, over the weekend i purchased a curt 17500 hitch at a fleamarket. after opening the somewhat destroyed box i noticed i was missing some parts based on parts list. from the parts list i am missing 6,7,8,9,and 10. i am assuming they were all in one bag of parts. the bolts and nuts i am sure i could get through a hardware store locally but number 6 head tilt spacers i doubt i will find. do you offer the head tilt spacers 2 of them separately or can you get them for me if so how much?

asked by: Brian

Expert Reply:

My contact at Curt confirmed you can use their Replacement Hardware Kit # C17550 to replace the missing components in your TruTrack weight distribution hitch # C17500. The kit includes the following

(2) Wire-lock linchpins
(2) Head tilt washers
(1) 3/4-10 x 5" Hex bolt
(1) 3/4-10 x 4" Hex bolt
(2) 3/4"-10 Nylock nuts
(1) 5/8" Hitch pin with clip