Replacement Hub Assemblies For A 2007 Four Winns Trailer Axle
Updated 06/14/2017 | Published 06/13/2017 >
Products Featured in This Question
Question:
Hello, I need parts help. I need to replace bearings, seals, cap and hub on my 2007 Four Winns boat trailer. Depending on cost, I may do all four corners. I have identified part numbers for the bearings and inner seal, but cannot identify the hub. This trailer has an oil bath setup and disk brakes on all four hubs. Details below. Can you please provide part numbers for hub and cap and anything else I might need? Thanks! 15inch rims Disk brakes Inner bearing: 25580 Outer bearing: 15123 Inner seal 225255UC Turbo Lube cap w/ seal Part number? Hub 6 on 5.5inch Part number? 1/2inch studs Anything else I need? Thanks again
asked by: Jeff
Expert Reply:
I have a few hub and drum assembly options for you however, we currently do not offer an oil bath hub and drums that matches the specs you have provided. If you'd like to replace your oil bath hubs with a standard grease hub, I do have a few kits that will include everything you need to install new hubs, bearings, and grease seals on your trailer. I recommend using the Trailer Idler Hub Assembly for 6,000-lb Axles part # AKIHUB-655-6-K as this is our most cost effective kit we have available.
You may also want to consider our LubriMatic Multi-Purpose Lithium Grease part # L11316.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- 25580 / 15123
- Standard Grade
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Is there a Hitch and Trailer Wiring for a 2026 Toyota RAV4 PHEV?
- Q&A: Dexter Axle Hub Conversion for 14.5 Inch or 15 Inch Wheels on Equipment Trailer
- Q&A: Recommended 12" Nev-R-Adjust Electric Trailer Brake Assemblies
- Q&A: Looking For Trailer Hub With 25590 Bearing
- Q&A: Replacement Braking Assembles for an AL-KO 7,200 lb Axle
- Q&A: How to Find Replacement Electric Drum Brakes for a Trailer
- Q&A: Replacement Driver And Passenger Side Brake Calipers For A 1997 Ranger Boat Trailer
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Best Boat Trailer Tires
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub


