Anti-Rattle, locking, Stabilization Pin that will not Rust

Question

Question:

Will it rust? Will it lock?

asked by: JH

0

Expert Reply:

I have just what you need, a stainless steel locking anti-rattle hitch pin for you.

I suggest the Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches part # SR25219. You will need a hollow shank for this to work. For a solid shank, you will want the Andersen Trailer Hitch Lock part # AM3493 for the lock in addition to our Brophy Stabilizer Bracket part # RHSB for anti-rattle.

expert reply by: Conner L

0

Answer 1

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 2

Hey Marc! Calibration for the Redarc #RED57AR only takes a few miles if in town, maybe a little longer if you aren't making frequent stops as it sometimes takes 15-20 braking applications. It’s fully automatic and uses internal sensors to detect…

view full answer...

Answer 3

There are a couple of good anti-rattle options for you, but definitely do not drill a hole into the receiver as it can compromise it. So what you can do is either add a clamp-on style stabilizer, or an anti-rattle hitch pin lock, depending on the…

view full answer...

Answer 4

No, it will not Glenn. The ICON Trailer Coupler Lock for Flat Lip 2-5/16" Ball Coupler item #AL63DQ requires a flat lip around and behind the receiver like our product pictures show. It looks like your trailer's coupler is similar to the…

view full answer...

Answer 5

Hey Richard, thanks for the information! The Roadmaster High-Low Adapter item #RM-048-10 is our highest capacity high low adapter. It has a 10-1/4" drop/rise so it'll be perfect with your setup. What year CRV do you have?

view full answer...

Answer 6

Because the shank of your bike rack has been crossthreaded, I recommend drilling both sides out and then using the Softride Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches #SR25219 to give you the correct fit and…

view full answer...

Answer 7

Hi Nick! The B&W Anti-Rattle Clamp for 2" Hitch Receivers #BW45FR will work with any standard 2" tow & stow, including the Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black #BWTS10048B. That…

view full answer...

Anti-Rattle, locking, Stabilization Pin that will not Rust

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching