Recommended Replacement Leaf Slipper Springs for 27-1/4 inch Leaf Slipper Springs
Updated 06/01/2017 | Published 05/30/2017 >
Question:
I have a trailer suspension question. My 5x8foot trailer currently has a single axle w/4 lug hubs. The leaf springs need to be replaced and Im having trouble finding replacements. The springs are 29inch overall with an open eye on one end. 27 1/4inch eye to open eye. 3/4inch wide. Can I use your slipper leaf springs to replace mine using the standard open eye bracket? Any help you could give me would be greatly appreciated. Thanks in advance.
asked by: Rich C
Helpful Expert Reply:
Yes, what you described sounds exactly like a leaf slipper spring. Since you want to go by the eye-to-eye, or in your case open-eye, measurement I recommend the 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles # e67SR.
This leaf slipper spring is rated for 6,000 lbs and has an eye-to-open-eye measurement of 27 inches. The extra 1/4 inch that you measured is nothing to be worried about since leaf springs can tend to stretch out a little bit over time. I am attaching a demonstration video where the 27 inch measurement is taken so you can be sure that we measured the same distance that you did.
Product Page this Question was Asked From
5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 6000 lbs
- 2 Inch Wide
- 5 Leaf
- 27 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: solar
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Search Results: 72~32
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Search Results: slipper spring equalizer
- Search Results: trailer axles
- Shop: Bright Way Solar Battery Charger - 7.5 Watt Solar Panel
- Q&A: How to Determine Correct Replacement Slipper Springs
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Search Results: trailer spindles
- Search Results: rollers
- Search Results: trailer hubs and drums
- Q&A: How to Determine if a 7K Dexter Trailer Axle Hub has 1/2 Inch or 9/16 Inch Studs
- Video: Feature Review Spring-Eye Bolt with Locknut for Slipper Springs
- Video: Hands-On with the CE Smith Trailer Axle w/ Idler Hubs
- Q&A: Replacement Hub and Brake Assemblies for Dexter 8-219 Wheel Hubs
- Q&A: Dimensions of Hangers Included with Single-Axle Trailer Hanger Kit for 2" Slipper Springs APS6SE
- Q&A: Distance from Top of Mounting Bracket Down to Spring Bracket of Slipper Spring Hanger
- Q&A: Hanger That Will Allow Hollywood Racks Sport Rider Bike Rack To Be Stored Vertically & Tight On Wall
- Q&A: Right Hand Side Equalizer to Match Left Hand Side # 13-82-1
- Video: Comprehensive Review: Dexter Electric Trailer Brakes
- Video: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles Review
- Video: A Closer Look at the 6-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles
- Video: Review of TruRyde Trailer Leaf Springs - 6 Leaf Slipper Spring With Hook End 8000 lbs Axle - TRU72FR
- Video: Checking Out the 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles
- Article: How to Replace Trailer Leaf Springs in 5 Steps

