Brake Shoe Solution for 2014 Jayco Trailer with 10 inch by 1-1/2 inch Brake Assemblies
Updated 05/31/2017 | Published 05/30/2017 >
Question:
Hello, Im looking for brake shoes or the entire assembly for my 2014 Jayco 3000 lb trailer electric. The shoes are 10x1.5 inches. I think I found the shoes BP04-065 but not an entire assembly. Is this my only option?
asked by: Brad L
Helpful Expert Reply:
If the brake assemblies you have are made by Dexter then the brake shoes part # BP04-065 that you referenced would be correct since they are 10 inch by 1-1/2 inch wide.
If you have a different brand let me know, but I don't believe we'd have a solution then.
The reason that 10 x 1-1/2 inch brakes are hard to find is because the axles associated with the Dexter 10 x 1-1/2 inch brakes normally had the brakes welded onto the 2.8k axle. This means the assembly cannot be replaced and you can only get replacement parts for the brakes. The shoes, # BP04-065, are a fit for Dexter 10 x 1-1/2 inch brakes.
Product Page this Question was Asked From
10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- RH
- Brake Shoes
- 10 x 1-1/2 Inch
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Shoe and Lining Kit for Manual Adjusting 10" Electric Brake Assembly - 3,500 lbs
- Q&A: Replacement for Dexter 8-283 Hub/Drum
- Q&A: Replacement Brakes for a 2011 Jayco Jay Flight G2 32BHDS
- Shop: Replacement Brake Shoes for Dexter 10" Nev-R-Adjust Electric Brake - Right Hand - 3,000 lbs
- Search Results: bp04~065
- Video: Review of Dexter Trailer Brakes - Replacement Brake Spring Set - K71-362-00
- Shop: Replacement Brake Spring Set for Dexter 10" x 1-1/2" Electric Trailer Brake Assembly
- Shop: Grease Seal
- Shop: 10" x 1-1/2" Electric Brake Shoe/Lining (One Wheel)
- Shop: Replacement Shoe Return Spring for Hayes/ALKO 10" Electric Trailer Brakes - Qty 1
- Q&A: Testing Electric Trailer Brakes Using Direct Battery Power
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 8 on 6-1/2 Bolt Pattern - 94" Long - 7,000 lbs
- Q&A: Replacement Brake Shoes for Dexter 10" x 1-1/2" Brake Assembly 23-472-00 and 23-473-00
- Q&A: Solution for Replacing Brake Assemblies on 1994 Terry Trailer
- Q&A: Is There a Cover for a Single 30 Lb Propane Tank
- Q&A: Can 10 x 2-1/4 Inch Electric Brakes Replace 10 x 1-1/2 Inch Assemblies on Dexter 2.8K Axle
- Article: Most Popular Wheel Bearings
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function


