Fifth Wheel Rail Hitch Pin To Fit The Reese Pull Pin Lock Plates # RP58093

Updated 03/01/2011 | Published 02/27/2011

Question:

Where can I find the pins to fit your locking plates My pins on the Husky 5th wheel are 1/2 x 4 1/2. I saw your pins and they are not that long. Thank You

asked by: Cliff

Expert Reply:

The Reese Pull Pin Lock Plates, part # RP58093 can be used on any 1/2 inch pull pin. It is installed in the cutout portion of the pin where the pin clip is normally installed. It is made to be locked with a padlock like the Master Lock Padlock, part # ML1KA.

The Hidden Hitch Fifth Wheel Hitch Replacement Pins and Clips, part # 6014, are the only pins I have and they are the only size pin that we use to attach our fifth wheel hitches to the base rails. They are 1/2 inch x 3-1/4 inches usable length. They are also used with the Reese lock plates # RP58093.

I looked up the Husky brand fifth wheel on the internet and they listed two pins that are for their brand of base rails. It listed them as 1/2 inch x 4-1/8 inches overall length (3-1/2 inches usable length) and 1/2 inch x 2-7/8 inches.

You will need to measure on your fifth wheel to see if the 3-1/4 inch usable length on the Hidden Hitch pins will fit your Husky hitch.

expert reply by: Jeff D